Precision Tune-Up Maintenance Plan

Cooling checkups

• Check the thermostat: Make sure that the thermostat is working properly and accurately, and is set to the correct temperature.
• Clean the air filter: Dirty air filters can reduce the efficiency of the cooling system, so they need to be cleaned or replaced regularly.
• Inspect the condenser coils: The condenser coils are responsible for dissipating the heat that is removed from the indoor air, and they can become dirty or clogged over time. Cleaning or brushing them helps to improve the system's efficiency.
•  Check the refrigerant levels: The refrigerant is the substance that cools the air in the system. Checking the refrigerant levels and topping them up if necessary is important for keeping the system running efficiently.
• Test the electrical connections: Electrical connections should be checked to ensure that they are secure and not damaged, which can cause problems with the system.
• Inspect the ductwork: Ductwork can become damaged, which can reduce the efficiency of the cooling system. Inspecting the ductwork and making any necessary repairs can help to improve the system's performance.
• Lubricate moving parts: Moving parts in the cooling system need to be lubricated to ensure that they run smoothly and efficiently.
• Check the fan blades: The fan blades can become dirty or damaged, which can cause the system to run inefficiently. Checking and cleaning the fan blades is important for keeping the system running properly.
• Test the system's performance: After completing all of the above tasks, the system should be tested to ensure that it is running efficiently and effectively.
• Check the blower motor: The blower motor is responsible for moving air through the system. Checking the blower motor's function and lubricating it if necessary can help to keep the system running efficiently.
• Inspect the drain lines: Condensation can build up in the system, and the drain lines are responsible for removing it. Checking the drain lines for clogs and leaks is important to prevent water damage to your home.
• Test the safety controls: Cooling systems have various safety controls that are designed to shut off the system if there is a problem. Testing these controls can help to ensure that the system is running safely.
• Inspect the exterior unit: If you have a central air conditioning system, the exterior unit should also be inspected. This includes checking the fan, cleaning the coils, and removing any debris that may have accumulated around the unit.
• Check the insulation: Insulation is important for preventing cool air from escaping and hot air from entering your home. Checking the insulation around the ductwork and refrigerant lines can help to ensure that your cooling system is running efficiently.
• Check the system's airflow: Proper airflow is essential for cooling your home effectively. Checking the system's airflow can help to identify any issues with ductwork or air filters that may be preventing the system from working properly.
• Clean the condenser coils: The condenser coils are responsible for releasing heat from the refrigerant. Over time, they can become clogged with dirt, leaves, and debris, which can reduce the system's efficiency.
• Clean the evaporator coils: The evaporator coils are responsible for absorbing heat from the air. Over time, they can become clogged with dirt and dust, which can reduce the system's efficiency.
• Clean the blower wheel and motor: The blower wheel and motor can become clogged with dust and dirt, which can reduce the system's efficiency.
• Clean the drain line: The drain line is responsible for removing condensation from the system. Over time, it can become clogged with algae or other debris, which can cause water damage to your home.

Heating checkups

• Check and clean the furnace burners: The burners in your furnace can become clogged with dirt and debris, which can cause them to work less efficiently or even shut down. A professional technician can clean the burners and check their performance to ensure that they are operating as they should.
• Check the flue pipe: The flue pipe is responsible for venting the combustion gases from the furnace to the outside. A blocked or damaged flue pipe can cause a dangerous buildup of carbon monoxide in your home. A technician can inspect the flue pipe for blockages and ensure that it is venting properly.
• Check the air filter: A dirty air filter can cause the furnace to work harder than necessary, leading to higher energy bills and a shorter lifespan for the furnace. A technician can check the air filter and replace it if necessary.
• Check the blower motor: The blower motor is responsible for circulating air through the furnace and the ductwork. A worn or damaged blower motor can cause the furnace to work less efficiently. A technician can inspect the blower motor and replace it if necessary.
• Check the thermostat: A malfunctioning thermostat can cause the furnace to cycle on and off more frequently than necessary or to run continuously, leading to energy waste and higher bills. A technician can check the thermostat and calibrate it if necessary.
• Check the electrical components: Electrical components such as switches, relays, and wiring can become loose or damaged over time, which can cause the furnace to malfunction. A technician can check these components and repair or replace them if necessary.
• Check the gas supply: If your furnace runs on natural gas or propane, a technician can check the gas supply line for leaks or damage. A gas leak can be dangerous and cause carbon monoxide buildup in your home.
• Check the heat exchanger: The heat exchanger is responsible for transferring heat from the furnace to the air that is circulated through your home. Over time, the heat exchanger can develop cracks or rust, which can cause carbon monoxide to leak into your home. A technician can inspect the heat exchanger for damage and recommend repair or replacement if necessary.
• Lubricate moving parts: The moving parts in your furnace, such as the blower motor and fan, can benefit from regular lubrication to reduce friction and prolong their lifespan. A technician can apply the proper lubricant to these parts during a maintenance checkup.
• Test the safety controls: Furnaces are equipped with safety controls that can shut down the system if a problem is detected. A technician can test these safety controls to ensure that they are working properly and providing adequate protection.
• Check the ductwork: The ductwork in your home can become damaged or blocked, which can reduce the efficiency of your heating system. A technician can inspect the ductwork for damage or leaks and recommend repairs if necessary.
• Test the carbon monoxide detector: Carbon monoxide is a dangerous gas that can be produced by a malfunctioning furnace. A technician can test the carbon monoxide detector in your home to ensure that it is working properly and providing adequate protection.